Crete Lease 20 VOC Release Agent

  • For Precast and Insitu
  • Work on all form typs including Rubber and Latex

Product Description

  • Permits easy, stain-free removal of forms or formliners from hardened concrete.
  • Releases any kind of form or formliner (including expanded polystyrene) from hardened concrete. Forms strip easily and cleanly ,also helps eliminate bugholes and stains.
  • It is easy to use and gives reliable results with no dust left on the mould.
  • Eliminates bugholes even when applied 5 times thicker than needed.
  • No staining.
  • Does not cause efflorescence /Does not wash off in moderate rain.
  • Doesn’t interfere with adhesion of caulk, architectural coatings, paint, sealers and curing compounds on cured concrete surfaces when properly applied.
  • It is biodegradable, non poisonous and contains no carcinogens

Fields of Application

  • Precast Panels with class 1 finish and /or fine detail requirements including rubber formliners.
  • Pavers and products made in steel or fibreglass moulds.

Application Instructions

Crete Lease 20-VOC requires special tips and sprayers. It is best applied using a ACTECH “FATBOY” AIR POWERED Sprayer and 110 067.tip or by using a mop. It is recommended that a filter be used in the line. The less you use the better the finish.

Works in either 5 minutes or weeks after being put onto the mould.

Availability

CodePack
100020-1000 Crete Lease 20 VOC-1000 L
100020-0200 Crete Lease 20 VOC-200 L
100020-0200 Crete Lease 20 VOC-20 L
100020-0005 Crete Lease 20 VOC-5 L

Downloads

Technical Data Sheet (TDS)

Safety Data Sheet (SDS)

Cresset Concrete Standards