- Electric Manual Caulking
- Safety nozzle shroud and increased ventilation.
- External thumb wheel for easy adjustment of the plunger release
- Indicator lights for 'power-on' and 'stand-by'.
- Optional plug-in temperature modules.
The TEC 3200 High Output Applicator is electronic technology at its best, making it the ideal production tool for assembling cast-in materials on formwork. Instant bonding of virtually any material ensures fast, efficient, cost effective production. The high efficiency heater housing, coupled with a solid state adjustable temperature controller, guarantees adhesive at the right temperature just when you need it.
The TEC 3200 can be left switched on for long periods of time without causing problems with the glue overheating (care should be taken when using soft glue formulations). No need to switch to a lower temperature - the TEC 3200 will do it for you and automatically return to full operating temperature when used!
Operation of the TEC 3200 is simplicity itself. Adhesive is extruded by simply squeezing the trigger, and the adhesive flow rate is regulated by trigger pressure. A valved nozzle ensures clean shut off.
The TEC 3200, loaded with two TECBOND 43mm cartridges, can never run out of adhesive as a cartridge always remains in the gun at the right temperature. Reloading takes just seconds. A powerful 400W stainless steel heater cartridge, combined with the efficient heater housing, provides a fast 4 minute warm up, and the solid state automatic temperature controller ensures accuracy to within 5°C of the set temperature. This, combined with the non-stick PTFE barrel and easy-action trigger, results in smooth free-flow adhesive application.
Safety and efficiency are the bywords with the TEC 3200. It is designed to comply with world- wide industrial and electrical safety standards, and has a totally enclosed heater housing and in-built thermal fuse protection to avoid temperature runaway in the case of component failure. The TEC 3200 is supplied complete with an integral gun stand, suspension ring, full operating instructions and one year guarantee.
|Heater||2 x 200W stainless steel cartridge (total 400 Watts)|
|Temp. Control||Solid state adjustable 130-215 ºC with automatic standby and thermal fuse|
|Power Cable||3M three core, rubber sheathed with fitted plug.|
|Melt Rate||Up to 3.5 kilo/hr depending on adhesive & temperature|
|Coverage||Variable, depending on lines or dots. See separate chart for more info|
|Adhesive Size||TECBOND 43mm glue slugs|