• Sacrificial formwork for sand/poor ground conditions


Conaform is a formwork material made from a flat steel wire mesh, with a “yellow” heat-shrunk layer of polyethylene applied to both sides of the mesh.


  • Easy to handle on site using non-specialist labour - reduces construction costs
  • No lifting equipment is required because Conaform is light and flexible
  • Back fill can be completed before concrete is poured, minimizing safety risks on site
  • No need to strip formwork after concrete has been cured
  • Quick assembly. No hammer, nails or saws – only tie-wire is needed
  • Formwork can be pre-formed in at factory into virtually any module size/shape required and arrives at site ready for installation
  • Supplied as flat sheets – can be cut and fabricated on site, as required
  • Versatile - perfect for difficult radius applications
  • Lost formwork – no need to excavate a large working space and then refill it later on
  • No need to clean or to return the formwork
  • Non-polluting, non-toxic, and recyclable


  • The strength and versatility of Conaform make it the particularly useful for the following applications.
  • Ground beams
  • Footing and bases
  • Pile caps
  • Construction joints (stop ends)
  • Special shapes or curves
  • Void formation
  • Ribbed and Waffle slabs
  • Penetrations
  • Recesses
  • Temporary fencing
  • Safety screens
  • Many other unlimited applications

Application Sketches


Code Width
4LECOF.06.2250 2250 600 10 3.98
4LECOF.09.2250 2250 900 10 5.97
4LECOF.12.2250 2250 1200 10 7.97
4LECOF.15.2250 2250 1500 10 9.96
4LECOF.18.2250 2250 1800 10 11.95