FlexproofX 1 is a single - component sealant specially designed for sealing reinforced concrete structures. It has extremely high flexibility and adhesive characteristics making it the perfect high grade sealant for applications where durability is a concern.
The special composition of FlexproofX 1 is based on a patented, prepolymer mixture that permits virtually no water absorption, even with continuous water exposure. In addition, it is specially composed to withstand the high alkalinity of concrete.
FlexproofX 1 is characterised by a high resistance against ozone, UV and atmospheric conditions. Thus, the sealant can be applied as an external sealant for exposed constructions.
The aforementioned high degree of elasticity and high adherence also allow FlexproofX 1 to tolerate a movement of up to 5 mm without losing waterproofing function, when applied at the recommended minimum thickness of only 2.5 mm. FlexproofX 1 can also handle negative pressures.
FlexproofX 1may be applied on wet or dry concrete, steel, stainless steel, stone, plastic, etc. without using a primer in advance.
FlexproofX 1 is available in different viscosities, offering the consumer the choice of using the perfect viscosity for the best installation.
- Single - component, ready to use, no mixing
- Specially developed for sealing reinforced concrete structures
- No primer required
- Bonds to damp and cold sub-surfaces
- High resistance against the alkalinity of the concrete
- Ideal for permanently sealing structural parts with ground contact
- Bonds to almost all sub-surfaces
- Dries completely, rainproof after only a few minutes
- Highly flexible, therefore highly adept at bridging cracks
- Not sensitive to weather
- Easy to apply with a roller or brush, or a scraper, spraying device or cartridge gun
- Isocyanate free
FlexproofX 1 can be applied on either dry or wet concrete (green concrete), so that no primer is required. FlexproofX® may also be used for steel, stainless steel, stone, plastic, etc. without using a primer in advance. It can be used not only for concrete to concrete joints but also for concrete to steel or to glass.
FlexproofX 1 is also applied as a sealant for joints and as a surface sealant in prefab-constructions. It can be used not only for concrete to concrete joints but also for concrete to steel or to glass.
By sanding FlexproofX 1 with fine silica sand, it is also possible to use FlexproofX 1 as a compound sealant under floating floor screed, tiles or plates.
The possibility of covering FlexproofX 1 with a layer of fine sand also offers various options in renovation work (balcony, steps, etc.).
|Type||Code||Size||Caulk||Trowel or Roll||Spray||Pour|
|FlexproofX® 1 Stable||1830600||Can 1 kg.||•|
|FlexproofX® 1 Stable||1830601||Bucket 15 kg.||•|
|FlexproofX® 1 NV self levelling||1830602||Foil Bag 7.5 kg||•|
|FlexproofX® 1 Sprayable||1830611||Sausage 600 ml||•||•|
|FlexproofX® 1 UV||1830610||Cartidge 290 ml||•|