Overview
Product Description
- It permits the removal of forms, form liners, pallets, etc. from hardened concrete
- A proprietary blend of vegetable oils in petroleum-based oils
- Contains no silicones and no carcinogens
- Helps minimize clean-up of forms and equipment
- Promotes easy form stripping
- Is non-staining when used properly.
- Helps reduce the formation of bug holes on concrete surfaces
- Does not “kill” concrete surfaces when properly applied
- Is good on aluminum forms
- Applies in sub-freezing or very hot temperatures
- Does not cause efflorescence
Fields of Application
- Precast Beams
- Hollow Core extruded products
- Insitu Formwork
- Application Instructions
SS 60 requires no special tips and sprayers. The less you use the better the finish.
Spraying problems caused by temperatures below 45° F can be solved by increasing spray pressure by about 10 psi. At lower temperatures it may be wise to use a slightly larger spray tip…say 8005.
Sprays easily using a Chapin 1949 and 80015. Apply just minutes before concrete is placed or up to 7 days if the treated surface is protected.
